Products by Price $150 - $400

• 1” thick, non-glaring matte finish surface

• All exposed edges have ” bevel

• Square edges standard, 2” radius corners available

• Specially compounded and cured for optimal chemical resistance with most

alkalies, alcohols, acids, and solvents.

• Self-extinguishing fire resistance

• Also available in laminate, phenolic resin, and chemical resistant laminate

FRAME SPECIFICATIONS

• Constructed from ¾” x 4”wide rails

• Legs are 2.25” square with ¼” radius edge

• Wood is finished with a solid lacquer sealer with a satin finish

• ADA compliant model available

APRON & LEG SPECIFICATIONS

• Apron is assembled using two 14-gauge leg brackets at each corner

• Apron attached to top using 14-gauge angle brackets and #10 x ”

pan head screws

• Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert

lock nuts

• Legs fitted with plastic boots designed for protection

• Standard surface construction is molded from a modified epoxy resin

• 1” thick, non-glaring matte finish surface

• All exposed edges have ” bevel

• Square edges standard, 2” radius corners available

• Specially compounded and cured for optimal chemical resistance with most

alkalies, alcohols, acids, and solvents.

• Self-extinguishing fire resistance

• Also available in laminate, phenolic resin, and chemical resistant laminate

FRAME SPECIFICATIONS

• Constructed from ¾” x 4”wide rails

• Legs are 2.25” square with ¼” radius edge

• Wood is finished with a solid lacquer sealer with a satin finish

• ADA compliant model available

APRON & LEG SPECIFICATIONS

• Apron is assembled using two 14-gauge leg brackets at each corner

• Apron attached to top using 14-gauge angle brackets and #10 x ”

pan head screws

• Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert

lock nuts

• Legs fitted with plastic boots designed for protection

• Standard surface construction is molded from a modified epoxy resin

• 1” thick, non-glaring matte finish surface

• All exposed edges have ” bevel

• Square edges standard, 2” radius corners available

• Specially compounded and cured for optimal chemical resistance with most

alkalies, alcohols, acids, and solvents.

• Self-extinguishing fire resistance

• Also available in laminate, phenolic resin, and chemical resistant laminate

FRAME SPECIFICATIONS

• Constructed from ¾” x 4”wide rails

• Legs are 2.25” square with ¼” radius edge

• Wood is finished with a solid lacquer sealer with a satin finish

• ADA compliant model available

APRON & LEG SPECIFICATIONS

• Apron is assembled using two 14-gauge leg brackets at each corner

• Apron attached to top using 14-gauge angle brackets and #10 x ”

pan head screws

• Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert

lock nuts

• Legs fitted with plastic boots designed for protection

• 1” thick, non-glaring matte finish surface

• All exposed edges have ” bevel

• Square edges standard, 2” radius corners available

• Specially compounded and cured for optimal chemical resistance with most

alkalies, alcohols, acids, and solvents.

• Self-extinguishing fire resistance

• Also available in laminate, phenolic resin, and chemical resistant laminate

FRAME SPECIFICATIONS

• Constructed from ¾” x 4”wide rails

• Legs are 2.25” square with ¼” radius edge

• Wood is finished with a solid lacquer sealer with a satin finish

• ADA compliant model available

APRON & LEG SPECIFICATIONS

• Apron is assembled using two 14-gauge leg brackets at each corner

• Apron attached to top using 14-gauge angle brackets and #10 x ”

pan head screws

• Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert

lock nuts

• Legs fitted with plastic boots designed for protection

• 1” thick, non-glaring matte finish surface

• All exposed edges have ” bevel

• Square edges standard, 2” radius corners available

• Specially compounded and cured for optimal chemical resistance with most

alkalies, alcohols, acids, and solvents.

• Self-extinguishing fire resistance

• Also available in laminate, phenolic resin, and chemical resistant laminate

FRAME SPECIFICATIONS

• Constructed from ¾” x 4”wide rails

• Legs are 2.25” square with ¼” radius edge

• Wood is finished with a solid lacquer sealer with a satin finish

• ADA compliant model available

APRON & LEG SPECIFICATIONS

• Apron is assembled using two 14-gauge leg brackets at each corner

• Apron attached to top using 14-gauge angle brackets and #10 x ”

pan head screws

• Legs attached with 3.5” long hanger bolts, flat washers, and nylon insert

lock nuts

• Legs fitted with plastic boots designed for protection

• 1.25” diameter one piece C–Frame design

• Weldless construction is 13 gauge steel tube with rotary bend

• Fixed frames available in three different heights

• Worksurface secured to brackets with #10 self tapping screws and steel straps

• Powder coat finished – Standard Charcoal Metallic

• Also available with wire book rack

• Height adjustable version available

GLIDE SPECIFICATIONS

• 1” x 2” nylon slide caps, riveted to tube

• Rear of frame equipped with anti-tilt saddle foot, riveted to tube

• Available with felt inserts

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Available with 18” or 23.75” base spread depending on surface size

• Surface attached to 12” x 12” - 4 gauge metal plate, ridge bolted

• 4” column diameter – 16 gauge wall

• Base is constructed of ¼” thick steel

• Available in cast-iron option

• Available in standard or bar height

GLIDE SPECIFICATIONS

• Black ABS plastic levelers available upon request

• ½” adjustment on optional levelers

• 1” saddled ply seat and back

• Optional upholstered seat and back available in COM fabrics

COM Requirements 0.5 - 1 yd(s)

• Can be constructed to meet CAL 133

FRAME SPECIFICATIONS

• 2 cross braces for seat mounting

• Fully welded

• Wear resistant powder coat finish available in any color

• Chair stacks 5 high

• Available in chair, arm chair and barstool options

GLIDE SPECIFICATIONS

• Plastic ball joint swivel for even contact with floor

• Casters optional

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Leg is adjustable from 22”–32”

• Upper finish is Charcoal Metallic powder coated steel

• Lower is Silver powder coated steel

• Attached to top with a metal-to-metal connection

• Locking/non-locking casters are available

• Floating J–Trough modesty panel for organized wire management

• Modesty panel constructed of 18 gauge, powder-coated steel

GLIDE SPECIFICATIONS

• Black, non-marring nylon feet

• Internal gripper spring for secure hold within tube

• Foot of glide is ½” tall with a 1.38” diameter

• Glide attachment has ¼, 20 thread and is 1.5” long

• Standard core construction is 45lb. density particle board

• 2” radius corners standard (square edges available upon request)

• Vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• Ergonomic design based on balanced seating principles

• Hydroformed steel column, with an oblong shape to prevent misalignment

• Integral casters and glides

• Storage drawer optional for accessories and technology

• Integrated poly footrest adjustable to users ergonomic requirements

• Fixed Height, 5 heights available: 23”, 25”, 27.5”, 30”, 32”

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full range

of laminate options

• Seat is soliwood construction made of 17 layers of ply beech wood

FRAME SPECIFICATIONS

• 1.178” x 2.437” oval, 13 gauge steel tube legs

• T–design dual access base

• Holes for footrest are adjustable in 1.5” increments

• Thru-bolt 1.5” surface stretcher bar

• Durable, powder coat finish

• Fitted with black injection molded frame caps and end caps

• 2.5”d x 1.5”w, 11ga. welded base beam for stability

• 2” rear casters for tilt-to-move mobility

GLIDE SPECIFICATIONS

• 1” hex adjustable nylon platform glide

• Steel, nickel plated threaded shaft glide