Smith C

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Surface and Panel

Are 3/4" thick solid core construction in low glare thermofused melamine laminate with PVC edge banding. Includes 7 1/2" deep x 35 1/2" wide shelf. Panels feature special fastners for strong, easy assembly. Work surface includes a wiring grommet in the back left corner. Panels are 21 1/8" high, top of panel is 17 1/2" above the work surface.

Options:

• Leg inserts
• Keybaord with mouse tray
• Swivel casters ( only on height adjustable legs )
• CPU holder
• Keyboard tray
• Light fixture
• Wire management 
• 6-outlet power strip

Warranty: 10 Year Limited Warranty

Product Specifications:

Surface and Panel

Are 3/4" thick solid core construction in low glare thermofused melamine laminate with PVC edge banding. Includes 7 1/2" deep x 35 1/2" wide shelf. Panels feature special fastners for strong, easy assembly. Work surface includes a wiring grommet in the back left corner. Panels are 21 1/8" high, top of panel is 17 1/2" above the work surface.

Options:

• Leg inserts
• Keybaord with mouse tray
• Swivel casters ( only on height adjustable legs )
• CPU holder
• Keyboard tray
• Light fixture
• Wire management 
• 6-outlet power strip

Warranty: 10 Year Limited Warranty

Product Specifications:

Surface and Panels

Are 3/4" thick solid core construction in low glare melamine laminate with PVC edge banding. Includes 7 1/2" deep x 35 1/2" wide shelf. Panels feature special fastners for strong, easy assembly. Work surface includes a 3" wiring grommet in the back left corner. Panels are 24" high, top of panel is 20 1/4" above the work surface.

• 6 outlet power strip
• Light fixture
• Wire management tray
• Leg insets
• Keyboard - mouse tray
• CPU holder
• Casters

Warranty: 10 Year Limited Warranty

Product Specifications:

Surface and Panels

Are 3/4" thick solid core construction in low glare melamine laminate with PVC edge banding. Includes 7 1/2" deep x 35 1/2" wide shelf. Panels feature special fastners for strong, easy assembly. Work surface includes a 3" wiring grommet in the back left corner. Panels are 24" high, top of panel is 20 1/4" above the work surface.

• 6 outlet power strip
• Light fixture
• Wire management tray
• Leg insets
• Keyboard - mouse tray
• CPU holder
• Casters

Warranty: 10 Year Limited Warranty

Product Specifications:

Surface and Panel

Are 1" thick solid core construction in low glare melamine laminate with matching 2mm PVC edge banding. End panels are 42" high, top of panel is 15 1/2" above work surface. Work surface is specially shaped, 41 1/2" wide, angled from 29 1/2" deep on the left side to 23 1/2" deep on the right side. A 16-gauge steel soft radius retaining rim protects the front edge of the work surface. The unit is standard with an 18-gauge steel wire management modesty panel tray, 8"H x 4"D x full width. Cables and wiring are managed via five cable entrances. 3" diameter grommets are provided in each of the end panels and work surface. 12-gauge steel angle brackets support and attach the work surface to the end panels, as does the wire management tray. For security, an optional locking door is available for the wire management tray. All steel components are finished with baked on epoxy powder paint. Equipped with four nickel-plated steel adjustable 1" glides. Ships ready to assemble.

Options:

• CPU holder
• Wire management door
• Plexiglass back panel

Warranty: 10 Year Limited Warranty

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options:

Product Specifications:

Top

13/16" thick solid core construction using high pressure laminate over 45 lb. industrial grade particle board with a gator ply backer sheet for balance. The edge is tough 3mm black PVC with soft radius edges and corners. Two 3" diameter wiring grommets lead from the work surface to the wire management system below.

Frame

The top is supported by a 14-gauge, 1 3/4" high, black powder coated no sag perimeter rail system and 5"H x 3 1/4"D x 16-gauge wire management tray. The legs interlock with the rail system to promote a very solid structure. No single-bolt connection used here. Fixed height legs are manufactured using 1 1/4" square 14-gauge steel tubing. Adjustable legs are 1 1/4" square 14-gauge steel tubing with adjustable inserts of 1" square 14-gauge steel tubing. Legs have chrome or black epoxy powder coat finish and 1" adjustable leveling glides. Adjustable leg inserts are always chrome finished. Ships ready to assemble.

Options: