• Pneumatic released rising monitor storage system
• Accommodates monitors up to 21” wide
• Storage for keyboard and mouse inside monitor cavity
• Interior wire management
• Monitor tilts for easy viewing and ergonomics
• Optional Locking mechanism for increased security
• CPU holder
included
SPECIFICATIONS
$3,285.00
$1,806.00
|
SHELL SPECIFICATIONS
• One piece soliwood shell constructed of 17 layers ply beech wood
• Thermally fused polypropylene/resin adhesive pressed form
• Strong and scratch resistant
• Available with or without handle hole
• Ergonomically designed for optimal lumbar support
FRAME SPECIFICATIONS
• 1.25" diameter, one piece C-frame design
• Weldless construction is 13 gauge steel tube with rotary bend
• Triple U channel bracket connector
• 4 rivet fasteners per seat
• Powder coat finished – Standard Charcoal Metallic
• Stacks 5 high
GLIDE SPECIFICATIONS
• 1" x 2" nylon slide caps, riveted to tube
• Rear of frame equipped with anti-tilt saddle foot, riveted to tube
• Available with felt inserts
$208.00
$114.00
|
SHELL SPECIFICATIONS
• One piece soliwood shell constructed of 17 layers ply beech wood
• Thermally fused polypropylene/resin adhesive pressed form
• Strong and scratch resistant
• Available with or without handle hole
• Ergonomically designed for optimal lumbar support
FRAME SPECIFICATIONS
• Stacks 20 high
• " wire frame
• 4 screw connectivity to soliwood shell
• Standard black powder coat finish (optional Chrome finish)
GLIDE SPECIFICATIONS
• Rests on clear 1.5" plastic snap-on glides
$223.00
$123.00
|
• One piece soliwood shell constructed of 17 layers ply beech wood
• Thermally fused polypropylene/resin adhesive pressed form
• Strong and scratch resistant
• Available with or without handle hole
• Ergonomically designed for optimal lumbar support
BASE SPECIFICATIONS
• Mechanism accepts standard tapered lift
• Single leer for gas cylinder activation
• 3 degree flat plate attachment to shell
• Standard 24" black plastic base
• Available with aluminum base
• Also available in stool height with chrome foot ring
CASTER SPECIFICATIONS
• 50mm wheel diameter, 38mm barrel diameter
• Available in both soft and hard casters
• Also available with rubber glide. 34mm top diameter, 55mm bott
SHELL SPECIFICATIONS
$271.00
$149.00
|
• One piece soliwood shell constructed of 17 layers ply beech wood
• Thermally fused polypropylene/resin adhesive pressed form
• Strong and scratch resistant
• Available with or without handle hole
• Ergonomically designed for optimal lumbar support
FRAME SPECIFICATIONS
• Stacks 5 high
• Four leg frame constructed with 20mm thick-walled steel tube
• Stool height constructed with a 1” – 16 gauge frame
• Wear resistant powder coat finish
• Protective bumpers applied to frame upper to prevent seat shell damage
when stacked
GLIDE SPECIFICATIONS
• 1” diameter nylon glides with felt bottom
• Plastic ball joint swivel for even contact with floor
• ¼”, 8 thread, plastic screw connection to tubular frame
$228.00
$125.00
|
SHELL SPECIFICATIONS
• 11 ply seat and back
• Standard in maple or cherry finish
• Ergonomically designed and formed shell with waterfall edge
• Optional upholstered seat and back available in COM fabrics
COM Requirements 0.45 yd(s)
• Built-in handle makes moving or stacking easy
• Can be constructed to meet CAL 133
FRAME SPECIFICATIONS
• Chair stacks 8 high, stool stacks 7 high
• Constructed of ¾” 13ga thick-walled steel tube
• 2 cross braces for seat mounting
• Wear resistant powder coat finish, chrome finish available
• Protective bumpers applied to frame upper to prevent shell damage
when stacked
• Wire sled version also available
GLIDE SPECIFICATIONS
• Stable, wear-resistant and floor protective nylon ball glides
$393.00
$216.00
|
SURFACE SPECIFICATIONS
• 1.125” table top thickness
• Standard core construction is 44lb. density particle board
• 2” radius corners standard, square edges available upon request
• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive
• Greenguard certified High Pressure Laminate comes standard with our full
range of laminate options
FRAME SPECIFICATIONS
• 1.175” x 2.437” oval, 13ga. steel tube legs
• T–design dual access base
• Bolt-on 1” x 2” front stretcher bar
• MIG welded frame
• Durable, powder coat finish
• Fitted with black injection molded frame caps to prevent scratching
• Optional book box and bag hook available
GLIDE SPECIFICATIONS
• 1” hex adjustable nylon platform glide
• Steel, nickel plated threaded shaft glide
$571.00
$314.00
|
SURFACE SPECIFICATIONS
• 1.125” table top thickness
• Standard core construction is 44lb. density particle board
• 2” radius corners standard, square edges available upon request
• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive
• Greenguard certified High Pressure Laminate comes standard with our full
range of laminate options
FRAME SPECIFICATIONS
• 1.175” x 2.437” oval, 13ga. steel tube legs
• T–design dual access base
• Bolt-on 1” x 2” front stretcher bar
• MIG welded frame
• Durable, powder coat finish
• Fitted with black injection molded frame caps to prevent scratching
• Optional book box and bag hook available
GLIDE SPECIFICATIONS
• 1” hex adjustable nylon platform glide
• Steel, nickel plated threaded shaft glide
$694.00
$381.00
|
• 1.125” table top thickness
• Standard core construction is 44lb. density particle board
• 2” radius corners standard, square edges available upon request
• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive
• Greenguard certified High Pressure Laminate comes standard with our full
range of laminate options
FRAME SPECIFICATIONS
• 1.175” x 2.437” oval, 13ga. steel tube legs
• T–design dual access base
• Bolt-on 1” x 2” front stretcher bar
• MIG welded frame
• Durable, powder coat finish
• Fitted with black injection molded frame caps to prevent scratching
• Optional book box and bag hook available
GLIDE SPECIFICATIONS
• 1” hex adjustable nylon platform glide
• Steel, nickel plated threaded shaft glide
SURFACE SPECIFICATIONS
$687.00
$377.00
|
FRAME SPECIFICATIONS
• 1.175” x 2.437” oval, 13ga. steel tube legs
• T–design dual access base
• Bolt-on 1” x 2” front stretcher bar
• MIG welded frame
• Durable, powder coat finish
• Fitted with black injection molded frame caps to prevent scratching
• Optional book box and bag hook available
GLIDE SPECIFICATIONS
• 1” hex adjustable nylon platform glide
• Steel, nickel plated threaded shaft glide
SURFACE SPECIFICATIONS
• 1.125” table top thickness
• Standard core construction is 44lb. density particle board
• 2” radius corners standard, square edges available upon request
• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive
• Greenguard certified High Pressure Laminate comes standard with our full
range of laminate options
$745.00
$409.00
|
• Seats up to 4 people with integrated work surface
• Tablet integration available
• All edges are finished
• 2” 14 ga. square Aluminum tubular frame with 14 ga aluminum
sheetmetal surfaces.
• 5 pc. Hand formed and welded, then thru bolted assembly with 8 - ½” bolts
• 2 - USB ports built into frame for power (powered when unit is wired to
power source)
• Wires route cleanly through the leg
SPECIFICATIONS
$7,550.00
$4,152.00
| |