• We accept all major credit cards:
Live Chat
Shop by Catagory
Shop By Brands
Best Deals Alert!




Products by Price Under $150

Picture of Vanerum Prime Adjustable School Desk, 30" x 20"D

Vanerum Prime Adjustable School Desk, 30" x 20"D

• 1.125” table top thickness

• Standard core construction is 44lb. density particle board

• 2” radius corners standard, square edges available upon request

• 2mm vinyl edgeband applied with medium-viscosity, high-melt adhesive

• Greenguard certified High Pressure Laminate comes standard with our full

range of laminate options

BASE SPECIFICATIONS

• 1.25” round 18 gauge steel tube

• Adjustable from 21”–29”

• Adjust in 1” increments and firmly lock into place with heavy-duty set screws

• Constructed with heavy-gauge tubular steel

• Legs are reinforced with solid #4 steel rod braces, steel-welded to leg plates

• Available with wire book rack

GLIDE SPECIFICATIONS

• 1.25” rubber cushioned, non-marring glides

• Nickel plated with steel ball joint swivel

• Also available in steel

 

 

WORKSURFACE SPECIFICATIONS

$148.00
$81.00

Picture of Vanerum Soliwood Armless Wood C Frame Stack Chair

Vanerum Soliwood Armless Wood C Frame Stack Chair

SHELL SPECIFICATIONS

• One piece soliwood shell constructed of 17 layers ply beech wood

• Thermally fused polypropylene/resin adhesive pressed form

• Strong and scratch resistant

• Available with or without handle hole

• Ergonomically designed for optimal lumbar support

FRAME SPECIFICATIONS

• 1.25" diameter, one piece C-frame design

• Weldless construction is 13 gauge steel tube with rotary bend

• Triple U channel bracket connector

• 4 rivet fasteners per seat

• Powder coat finished – Standard Charcoal Metallic

• Stacks 5 high

GLIDE SPECIFICATIONS

• 1" x 2" nylon slide caps, riveted to tube

• Rear of frame equipped with anti-tilt saddle foot, riveted to tube

• Available with felt inserts

 

$208.00
$114.00

Picture of Vanerum Soliwood Armless Wood Sled Base Stack Chair

Vanerum Soliwood Armless Wood Sled Base Stack Chair

SHELL SPECIFICATIONS

• One piece soliwood shell constructed of 17 layers ply beech wood

• Thermally fused polypropylene/resin adhesive pressed form

• Strong and scratch resistant

• Available with or without handle hole

• Ergonomically designed for optimal lumbar support

FRAME SPECIFICATIONS

• Stacks 20 high

• " wire frame

• 4 screw connectivity to soliwood shell

• Standard black powder coat finish (optional Chrome finish)

GLIDE SPECIFICATIONS

• Rests on clear 1.5" plastic snap-on glides

 

$223.00
$123.00

Picture of Vanerum Soliwood Armless Wood Swivel Chair

Vanerum Soliwood Armless Wood Swivel Chair

• One piece soliwood shell constructed of 17 layers ply beech wood

• Thermally fused polypropylene/resin adhesive pressed form

• Strong and scratch resistant

• Available with or without handle hole

• Ergonomically designed for optimal lumbar support

BASE SPECIFICATIONS

• Mechanism accepts standard tapered lift

• Single leer for gas cylinder activation

• 3 degree flat plate attachment to shell

• Standard 24" black plastic base

• Available with aluminum base

• Also available in stool height with chrome foot ring

CASTER SPECIFICATIONS

• 50mm wheel diameter, 38mm barrel diameter

• Available in both soft and hard casters

• Also available with rubber glide. 34mm top diameter, 55mm bott

SHELL SPECIFICATIONS

$271.00
$149.00

Picture of Vanerum Soliwood Cafeteria Dining Armless Wood Stack Chair

Vanerum Soliwood Cafeteria Dining Armless Wood Stack Chair

• One piece soliwood shell constructed of 17 layers ply beech wood

• Thermally fused polypropylene/resin adhesive pressed form

• Strong and scratch resistant

• Available with or without handle hole

• Ergonomically designed for optimal lumbar support

FRAME SPECIFICATIONS

• Stacks 5 high

• Four leg frame constructed with 20mm thick-walled steel tube

• Stool height constructed with a 1” – 16 gauge frame

• Wear resistant powder coat finish

• Protective bumpers applied to frame upper to prevent seat shell damage

when stacked

GLIDE SPECIFICATIONS

• 1” diameter nylon glides with felt bottom

• Plastic ball joint swivel for even contact with floor

• ¼”, 8 thread, plastic screw connection to tubular frame

$228.00
$125.00

Picture of Wall Mount Laptop Security Cabinet

Wall Mount Laptop Security Cabinet

20 gauge welded steel construction. Fits most laptops that are 17” or smaller. The platform where the laptop sits is 12-1/4”H x 17-1/4”W and comes with a cushioned pad. When the door is down the length from the back of the cabinet to the top of the door (platform) is 18-3/4”. Electronic keypad lock run by 4-AA batteries. No need for keys. Has administrative password and user password. Both can be changed. Keypad has two backup emergency means. The first is an external power source. If the battery fails, it plugs into the keypad. The second is a key, if the code is forgotten. This is located under the handle plate. The platform has adjustable elastic straps to hold the laptop securely in place when closed. The left and right sides of the unit each have a grommet 1-1/2” in diameter for power cords to allow for charging when the laptop is secured. Cell phone and camera storage holders included. Powder coated charcoal color in stock. Space in bottom for a power strip. Shipped UPS. Shipping weight is 20lbs.

$219.00
$105.00

Picture of Welded Steel 30" Two Tier Compartment Storage Locker, 15" x 18" x 66"

Welded Steel 30" Two Tier Compartment Storage Locker, 15" x 18" x 66"

2 Tier Locker compartment measures 30" and have two side hooks and a flat bottom. Standard Duty Lockers. Doors have vent holes and a die cast handle that secures the door in a closed position and accommodates a standard padlock.Welded steel construction. Powder coat finish. Overall size of all lockers is 15”W x 18”D x 66”H. Shipped assembled (s).

$305.00
$144.00

Picture of Welded Steel Single Tier Storage Locker, 15" x 18" x 66"

Welded Steel Single Tier Storage Locker, 15" x 18" x 66"

The single tier locker has a top shelf and two side hooks (except the five tier locker) and a flat bottom. Standard Duty Lockers. Doors have vent holes and a die cast handle that secures the door in a closed position and accommodates a standard padlock. Welded steel construction. Powder coat finish. Overall size of all lockers is 15”W x 18”D x 66”H. Shipped assembled (s).

$292.00
$137.00